To the techs how can I get this screw put to replace it
This is on my 24 Daiwa certate sw. they must have loaded it with loctite because it was apparently not coming out lol. (Made sure to use the correct size torque bit originally).
Posted by Fhfriend
4 Comments
AssMasterXL on
Extractors are sold, but id first try the same bit hammered into the screw. 30% of the time, it works every time
SpiritDCRed on
Depending on how thoroughly you’ve destroyed it, you may need to use an extractor bit. But then you’ll need to order a new screw. Might want to pause and ask yourself if it’s really worth removing in the first place. I wouldn’t unless it’s required to replace another broken part.
DRWildside1 on
Tap out bits. Not to hard to use.
Medium_Chain_9329 on
Did you try heating it up? If the material around permits.
4 Comments
Extractors are sold, but id first try the same bit hammered into the screw. 30% of the time, it works every time
Depending on how thoroughly you’ve destroyed it, you may need to use an extractor bit. But then you’ll need to order a new screw. Might want to pause and ask yourself if it’s really worth removing in the first place. I wouldn’t unless it’s required to replace another broken part.
Tap out bits. Not to hard to use.
Did you try heating it up? If the material around permits.