How to connect my fish finder to this 12 vbattery ?
How to connect my fish finder to this 12 vbattery ?
Posted by No_Security2665
1 Comment
Rhd55 on
First you will need the bolts and the square nuts that came with the battery that go into the terminal. If you can’t find them, you can get them on Amazon ([For example](https://a.co/d/fb2KScY).
Next you will need a crimp ring terminal for a 1/4” stud. [This kit at Walmart has everything you will need](https://www.walmart.com/ip/629868231?sid=afd9922d-6635-43a3-97d6-71711d755ffc) or you can find an equivalent set on Amazon. Crimp that onto an [inline fuse holder](https://a.co/d/eIrWCoc) and crimp the male side of that spade connector to the other end of the fuse holder. That’s your positive.
For the negative, you will do the same thing, ring terminal and male spade connector onto a piece of wire. Connect the red wire to the positive and black to the negative.
1 Comment
First you will need the bolts and the square nuts that came with the battery that go into the terminal. If you can’t find them, you can get them on Amazon ([For example](https://a.co/d/fb2KScY).
Next you will need a crimp ring terminal for a 1/4” stud. [This kit at Walmart has everything you will need](https://www.walmart.com/ip/629868231?sid=afd9922d-6635-43a3-97d6-71711d755ffc) or you can find an equivalent set on Amazon. Crimp that onto an [inline fuse holder](https://a.co/d/eIrWCoc) and crimp the male side of that spade connector to the other end of the fuse holder. That’s your positive.
For the negative, you will do the same thing, ring terminal and male spade connector onto a piece of wire. Connect the red wire to the positive and black to the negative.