how much line should I put on this, manual says it can fit 150m(160yds) of 0.2mm, I put 150yds of 10lb power pro(0.15mm) but it looks overspooled to me, I did tigth as much as I could
Posted by zheke91
6 Comments
DWCawfee on
Thats to full my man i would take off a but so you have like 1/8” lip
lmb_frankie on
overspooled, the numbers are there to assist you
interestedcharmander on
Gonna end up with a tangled mess
LeepOnMyDick on
Sweet reel! As other bro said, you’re going to want to take some off. Some say to let it self regulate with casts, wind, and tying, but it’ll fish way better right away if you take some off until right before the bevel on the lip of the spool.
_fuckernaut_ on
Forget the numbers, you fill it till it’s full. In your case it is overfull, you’ll need to pull off a couple dozen yards for it to be usable. You want the line level to be right at the inner edge of the bevel (red lip on the spool).
6 Comments
Thats to full my man i would take off a but so you have like 1/8” lip
overspooled, the numbers are there to assist you
Gonna end up with a tangled mess
Sweet reel! As other bro said, you’re going to want to take some off. Some say to let it self regulate with casts, wind, and tying, but it’ll fish way better right away if you take some off until right before the bevel on the lip of the spool.
Forget the numbers, you fill it till it’s full. In your case it is overfull, you’ll need to pull off a couple dozen yards for it to be usable. You want the line level to be right at the inner edge of the bevel (red lip on the spool).
Little too much